Data mover
You can use
Data mover
to move certain data, such as contacts and settings, from your Nokia 9200 series Communicator to your
Nokia 9500 Communicator with infrared or a memory card.
Before you start, make sure that there is enough free memory in your devices or memory card for the move. If there is less than
2 MB of free memory in the Nokia 9500 Communicator, you cannot move any data.
Do not use the Nokia 9500 Communicator when using Data mover. If possible, switch off the cover phone. Make sure you have
enough battery power, or connect the device to a charger.
Note: Before you use an existing compatible memory card with your Nokia 9500 Communicator, you must convert the
memory card with Data mover and reinstall the applications that you previously installed to the memory card. However,
do not reinstall any pre-installed applications for the Nokia 9210 Communicator. Your Nokia 9500 Communicator
contains a later version of these applications, and these later versions must be used with Nokia 9500 Communicator.
There may be additional steps, depending on the type of data that you want to move, the method you want to use to move the
data, the amount of free memory on your communicators or memory card, or the number of successful or unsuccessful data
moves you have made previously.
Make sure that the infrared ports of the devices are facing each other.
Always read the instructions that Data mover provides on the display.
1. Go to
Desk
>
Tools
>
Data mover
. If there is data on a memory card, insert it to your Nokia 9200 series Communicator. Press
Continue transfer
.
2. Select your current city and country, and press
OK
.
3. Activate infrared in both devices, make sure that the infrared ports of the devices are facing each other, and press
Continue
. An infrared connection is established between the devices.
4. Press
Send data collector
to send Data collector to your Nokia 9200 series Communicator. Data collector is sent as an infrared
message to the Inbox in your Nokia 9200 series Communicator. To install Data collector, press
Open
in the 9200 series
Communicator. If
Open
is not available, press
Save
to save the installation file, and open it from File manager. The Data
collector starts automatically after installation. Control the rest of the data move process with the Nokia 9500 Communicator.
After the Data collector is installed, press
Connect data coll.
in the Nokia 9500 Communicator.
5. In the Nokia 9500 Communicator, select the data you want to move from your Nokia 9200 series Communicator. You can
move calendar and contact information, messages, settings, documents, and images. Some files, such as business card
messages and e-mail messages not stored in the Inbox , are not moved.
6. Press
Transfer infrared
or
Transfer mem. card
, depending on the method you want to use.
7. Press
Start transfer
. If the process is interrupted, restart Data mover, and continue with the move. If the problem happens
again, there may be a problem with the data you are trying to move. Start the data move process again, but do not select
the data that seems to cause the problem.
8. Press
OK
after the transfer to finish the data move process.
9. Press
Exit
to close Data mover, or
Convert mem. card
to convert a memory card for use in your Nokia 9500 Communicator.
Moving large amounts of data from your Nokia 9200 series Communicator may take some time.